|
User manual for Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660
- Manufacturer: Barco
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Routers & Switchers
- Safety instructions
- Startup and operation of the routers & switchers
- Tips for setting up your Barco
- Settings and expert assistance
- Contact Barco service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660,
which address similar problems with connecting and setting up Routers & Switchers Barco.
|
User manual for the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660
The user manual for the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660 provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Routers & Switchers.
The Barco MatrixPRO-II 16x16 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.
A genlock input synchronizes all switching with the house sync. A user-selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub-switchers and let each color channel switch independently.
Control can be by front panel buttons, by RS232, or via Ethernet connections. The switcher also fully integrates with Barco's Encore and ScreenPRO-II presentation systems and can be controlled through them.
|
If you own a Barco routers & switchers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660:
Supported Formats | DVB-ASI, SMPTE 259M, SMPTE 292M, SMPTE 424M; 270M bps - 2.97Gbps; 2K, 2048x1556/23.98 and 24 | Standard | SMPTE 259M / SMPTE 292M / SMPTE 424M | Data Rate | 270Mbps - 1.485Gbps / 2.97Gbps | Connector | 75 ohm BNC female | Impedance | 75 ohm nominal | Return Loss | > 15dB (5MHz - 1.485GHz); > 10dB (1.5 - 3GHz) | Cable Equalization | Automatic up to 230' (70m) @ 2.97Gbps, typical Belden 1694A Automatic up to 328' (100m) @ 1.485Gbps, typical Belden 1694A Automatic up to 984' (300m) @ 270Mbps, typical Belden 8281 | Connector | 75 ohm BNC female | Impedance | 75 ohm nominal | Return Loss | > 15dB (5MHz - 1.485GHz); > 10dB (1.5 - 3GHz) | Signal Level | 800mVp-p ±10% | Rise & Fall | - 20 - 80% - SD limit: 0.4 - 1.5ns, < 0.5ns rise/fall variation - HD limit: < 270ps, < 100ps rise/fall variation - 3G-HD limit: < 135ps, < 50ps rise/fall variation | Amplitude Overshoot | < 10% | Signal Polarity | Non-inverting electrical with respect to inputs | Power | 19W | Signal Speed | Timing jitter: SD: < 0.2 UI; 3G-HD/HD: < 1UI Alignment jitter: SD: < 0.2UI; 3G-HD/HD: < 0.2UI | Safety Regulations | Compliant with CE EN55103-1 and 2 | Control | Serial port: RS-232, DB9 connector female Ethernet port: 10/100BaseT Ethernet bus, 1x RJ45 connector | Rack Mount | 1RU | Dimensions | 1.7 x 19 x 2" (4.4 x 48.3 x 5 cm) | Weight | 3.1 lbs (1.4 kg) | |
The user manual for the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660 can be downloaded in .pdf
format if it did not come with your new routers & switchers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Barco users keep a unique electronic library
for Barco routers & switcherss,
where you can use our link to download the user manual for the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660.
The user manual lists all of the functions of the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660,
all the basic and advanced features and tells you how to use the routers & switchers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Barco service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660. User manuals are also
available on the Barco website under Professional Video - Signal Processing & Distribution - Routers & Switchers.
Question and answer discussion forum concerning user instructions and resolving problems with the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Barco MatrixPRO-II 16x16 Switcher with 3G SDI R9004660
|
|
|
|
|