|
User manual for Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z
- Manufacturer: Behringer
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - 70-Volt Amplifiers
- Safety instructions
- Startup and operation of the 70-volt amplifiers
- Tips for setting up your Behringer
- Settings and expert assistance
- Contact Behringer service
- Troubleshooting
- Warranty information
- Price: 450 USD
|
We recommend checking out our discussion threads on the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z,
which address similar problems with connecting and setting up 70-Volt Amplifiers Behringer.
|
User manual for the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z
The user manual for the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - 70-Volt Amplifiers.
Featuring comprehensive digital signal processing (DSP) and remote setup via Ethernet / USB in a 2U rack-mountable, fan-cooled chassis, the AX6220Z 1000W 70/100V High-Impedance Power Amplifier from Behringer is a professional, high-performance, 2-channel power amplifier for installation with 70 / 100V distributed speaker systems. It utilizes transformer-less, class-D topology and switch-mode power technology to provide low noise and good transient response while reducing amplifier energy costs. The dual variable-speed fans create back-to-front ventilation to keep racks running cool, and zero-attack limiters combine with independent DC and thermal overload protections to safeguard the amplifiers and connected speaker systems. Featuring 24-bit / 96 kHz converters to ensure signal integrity, the processing section of this AX6220Z amplifier maintains an broad dynamic range while offering sophisticated DSP options including delay, crossover, dynamics, and both parametric (8-band) and dynamic (2-band) EQ. Parameters can be set and stored using intuitive front-panel controls and the amber backlit LCD also displays meters and indicates muting, system fault, over-current, and overdrive. Additionally, the front panel also has an illuminated master volume knob with a clipping indicator. A front-panel USB connector is included to allow setup on a local PC, while a rear-panel Ethernet connection enables remote control and monitoring using the Behringer Amp Remote software application (sold separately). Changes to settings can be prevented with secure lockout. The input channels accept balanced or unbalanced microphone or line-level signals via XLR / TRS combination jacks or 3-pin Euroblock connectors. The outputs are connected to speakers via a 4-screw terminal strip. A 2-pin Euroblock socket is also provided for sequential power control and remote power On / Off. Furthermore, this system features all mating Euroblock connectors as well as integrated rack ears and screw covers. The AX6220Z Power Amplifier represents the apex of power, flexibility, and control. It is a suitable choice for contractors designing high-performance sound reinforcement and playback systems for the most demanding applications. Whether accessed directly, from across the hall, or halfway around the planet, this amplifier features a plethora of connectivity and control options, providing immediate access to unbridled functionality.
|
If you own a Behringer 70-volt amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z:
Power Output | Stereo Peak, 1% THD, 1 kHz Sine Wave (Both Channels Driven) At 70 V: 500 W At 100 V: 700 W RMS, 1% THD, 1 kHz Sine Wave (Both Channels Driven) At 70 V: 350 W At 100 V: 480 W | Audio I/O | 2 x 3-pin Euroblock and XLR / TRS combo | PC Control | Type B USB on front or IEEE 802.3 Ethernet network connector on back panel | Input Impedance | 10 kΩ unbalanced 20 kΩ balanced | Input Sensitivity | 1 V at 20 Ω | Input Clipping Level | 11 Vrms (23 dBu) | System Gain | Overall at 10 Ω: 37 dB (70 V) 40 dB (100 V) | Outputs | 4-position barrier strip | Output Circuit | Type: Class D | Minimum Load Impedance | 14 Ω (70 V) / 20 Ω (100 V) | Frequency Response | 30 Hz to 20 kHz (-0.3 / -2 dB) (70 V) 30 Hz to 20 kHz (-0.3 / -1 dB) (100 V) | THD + N | <0.25% at 1 W, 1 kHz dBr into 14 Ω load | Signal to Noise Ratio | 87 dB (at input 2 dBu) 93 dB (at 22 dBu) | Damping Factor | >200 at 62 Ω | Crosstalk | >68 dB below rated power 1 kHz | Indicators | Power indicator LED ring illumination (yellow) Overload/Protection LED ring (red) LCD display with VU meters, system fault, overheating, overcurrent / overdrive indicators | Operating Temperature | 14 to 104°F (-10 to +40°C) | Cooling Method | Automatic variable speed fan | Display | LCD 128 x 32, amber backlit | Delay | Function: 0 to 300 ms (per channel) | Crossover | Function: 3 filter types, up to 48 dB/octave | EQ Type | 8-band parametric, (per channel) 2-band dynamic equalizer | Dynamics | Zero attack limiter (per channel) | Presets | 20 total presets, 19 user-definable | Power Supply | At 1/8 rated power: 200 W | Power Efficiency | 84 % | AC Power Source | 100 to 120 VAC 50/60 Hz 220 to 240 VAC 50/60 Hz | Materials | Case material: Cold-rolled steel Face Plate Material: Perforated steel | Dimensions (H x W x D) | 3.5 x 17.0 x 16.0" (88.9 x 431.8 x 406.4 mm) | Weight | 21.4 lbs (9.7 kg) | Package Weight | 20.9 lb | Box Dimensions (LxWxH) | 22.5 x 20.0 x 8.5" | |
The user manual for the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z can be downloaded in .pdf
format if it did not come with your new 70-volt amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Behringer users keep a unique electronic library
for Behringer 70-volt amplifierss,
where you can use our link to download the user manual for the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z.
The user manual lists all of the functions of the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z,
all the basic and advanced features and tells you how to use the 70-volt amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Behringer service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z. User manuals are also
available on the Behringer website under Pro Audio - Installation Sound - 70-Volt Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Behringer AX6220Z 1000W 70/100V Dual-Channel AX6220Z
|
|
|
|
|