|
User manual for Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A
- Manufacturer: Black Box
- Basic description and contents of package
- Product classification: Computers & Solutions - Computer Peripherals - DVI/VGA KVM Extenders
- Safety instructions
- Startup and operation of the dvi/vga kvm extenders
- Tips for setting up your Black Box
- Settings and expert assistance
- Contact Black Box service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A,
which address similar problems with connecting and setting up DVI/VGA KVM Extenders Black Box.
|
User manual for the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A
The user manual for the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A provides
necessary instructions for the proper use of the product Computers & Solutions - Computer Peripherals - DVI/VGA KVM Extenders.
The ACU1008A ServSwitch KVM (VGA/PS/2/Serial) over CAT5 Dual-Access Extender Kit by Black Box, comprised of a local transmitter unit and a remote receiver unit, enables you to place a VGA monitor, a PS/2 keyboard, a PS/2 mouse, and a serial device (such as a modem, printer, or touch screen) as far as 1000' from your PC's CPU, using a CAT5 cable. This extender supports video resolution of up to 1280 x 1024 at 393.7' and 1024 x 768 at 984.3'. A dual-access model, the ACU1008A enables you to operate your PC from either a local or a remote console (VGA monitor, PS/2 keyboard, and PS/2 mouse).
The local unit is connected directly to a PC's CPU or to the user port of a KVM switch using the included extension cable, and the remote KVM console is attached to the remote unit. On the local end you can attach a local KVM console which will contend with the remote station for CPU control. Every time the inactivity timeout period elapses, the dual-user extender switches automatically to the first station from which it detects a keyboard or mouse activity. The serial port enables you to connect almost any standard asynchronous RS-232 peripheral (including trackballs and serial mice) that operates at up to 19.2 kbps and doesn't require any control signals other than RTS, CTS, DSR, and DTR.
The remote unit features brightness and focus dials to adjust the screen image. Because the extender performs complete PS/2 keyboard and mouse emulation, you can boot the PC without having a keyboard or mouse attached to it. Your PC will boot even if your extender's remote unit is not powered or if no keyboard or mouse is connected to the local or remote unit. The keyboard and mouse emulation feature also allows you to "hot-swap" the remote or local keyboard and mouse at any time; you can unplug and replug the keyboard and mouse without disrupting the operation of the PC. The extender requires no software and is compatible with all operating systems.
The remote unit draws its power from the included external power supply, and the local unit is powered by the connection from the CPU's keyboard port. Jumpers on the remote unit's board enable you to configure an equalization-adjustment range appropriate to the length of the cable connecting the local and remote units. Rotary controls on the remote unit enable you to adjust the compensation level while the system operates. The extender is compatible with Microsoft IntelliMouse and other wheel mice. You can even use a standard PS/2 mouse at one user station and an IntelliMouse at the other.
|
If you own a Black Box dvi/vga kvm extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A:
Clamping Voltage | 15 VDC | Compatibility | Keyboard: IBM PC/AT, PS/2, (PC/AT types require connector adapter) Video: : VGA, SVGA, XGA, XGA-2, or RGB (sync on green); call Black Box Tech Support if your system has monitor ID-bit requirements Mouse: IBM PS/2 two button, Microsoft IntelliMouse, Logitech PS/2 three button | Transmission Range | 1000' (305 m) maximum | Resolution | 1280 x 1024 at 300' (91.4 m) 1024 x 768 at 1000' (304.8 m) | Serial Characteristics | Data Rate: 9600 bps or 19.2 kbps (user-selectable) Data Format: 8 data bits, no parity, 1 stop bit (fixed) Flow Control Hardware: RTS/CTS passed through or looped back, DTR/DSR passed through or looped back, or none (user-selectable) Software: Transparent to software flow control | Video Characteristics | Bandwidth (to -3 dB): Local unit 150 MHz Remote unit 300 MHz Across 328' (100 m) of UTP: 95 MHz (with equalization) Compensation: 3-stage continuously variable Coupling: DC I/O Signal Levels: 0.7 VDC pp Synchronization: H/V or composite, TTL signal levels; sync polarity is preserved | Connectors | Local Unit: 2 x 6-pin mini DIN female, keyboard and mouse to CPU 1 x 15-pin Sub-D male, video input 2 x 6-pin mini DIN female, local keyboard and mouse 1 x 15-pin Sub-D female, video output 1 x 9-pin Sub-D male, serial port 1 x RJ-45, interconnect Remote Unit: 2 x 6-pin mini DIN female, keyboard and mouse 1 x 15-pin Sub-D female, video output 1 x 9-pin Sub-D male, serial port 1 x 9 VDC barrel power plug 1 x RJ-45, interconnect | Controls | Both Units: 1 x internal data-rate jumper 1 x internal flow-control jumper block Remote Unit Only: 2 x front-mounted dials for brightness and focus 3 x internal video-distance (cable-length) jumpers 1 x internal 4-position DIP switch for various options | Operating Temperature | 32 to 104°F (0 to 40°C) | Humidity Tolerance | 5 to 90%, noncondensing | Power Supply | Local Unit: 5 VDC at up to 120 mA, CPU keyboard port, Remote Unit: 9 VDC, 1 A, external power supply | External Power Supply (AC Adapter) | 100 - 240 VAC, 50-60 HZ external, autosensing, with IEC 320 connector | Dimensions (H x W x D) | Local Unit: 1.4 x 8.4 x 3.9" (3.6 x 21.3 x 9.9 cm) Remote Unit: 1.4 x 7.8 x 3.9" (3.6 x 19.8 x 9.9 cm) | Weight | Local Unit: 1.1 lb (0.5 kg) Remote Unit: 1.1 lb (0.5 kg) | |
The user manual for the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A can be downloaded in .pdf
format if it did not come with your new dvi/vga kvm extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Black Box users keep a unique electronic library
for Black Box dvi/vga kvm extenderss,
where you can use our link to download the user manual for the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A.
The user manual lists all of the functions of the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A,
all the basic and advanced features and tells you how to use the dvi/vga kvm extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Black Box service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A. User manuals are also
available on the Black Box website under Computers & Solutions - Computer Peripherals - DVI/VGA KVM Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Black Box ACU1008A ServSwitch KVM (VGA/PS/2/Serial) ACU1008A
|
|
|
|
|