|
User manual for DATAPATH VisionAV-HD Capture Card VISIONAV-HD
- Manufacturer: DATAPATH
- Basic description and contents of package
- Product classification: A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories
- Safety instructions
- Startup and operation of the multi viewer accessories
- Tips for setting up your DATAPATH
- Settings and expert assistance
- Contact DATAPATH service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the DATAPATH VisionAV-HD Capture Card VISIONAV-HD,
which address similar problems with connecting and setting up Multi Viewer Accessories DATAPATH.
|
User manual for the DATAPATH VisionAV-HD Capture Card VISIONAV-HD
The user manual for the DATAPATH VisionAV-HD Capture Card VISIONAV-HD provides
necessary instructions for the proper use of the product A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
The VisionAV-HD Capture Card from DATAPATH is a four lane PCI Express capture card with three video capture inputs - two channels of HD DVI video and an extra composite video input all operating simultaneously and independently; with full analog and digital audio support. The VisionAV-HD also adds multiple channels of audio capture, which can be synchronized in software using time stamping with all video capture channels.
This half-length full height card features a full mechanical sixteen lane connector with notches which will enable it to fit 4, 8 and 16 lane motherboard connectors. The VisionAV-HD also adds embedded audio capture from the HDMI signal, which can be synchronized with the respective video channel. The video capture card provides balanced and unbalanced analog audio capture through an optional AM2 audio module. This provides a single flexible card solution for areas such as medical, lecture capture, web casting and video conferencing.
|
If you own a DATAPATH multi viewer accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DATAPATH VisionAV-HD Capture Card VISIONAV-HD in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the DATAPATH VisionAV-HD Capture Card VISIONAV-HD:
Card Format | PCI Express x4 half size plug-in card | Connectors | 2 x DVI-I, video input 1 x RCA female, video input | Capture | HDMI: Supports HDMI 1.3 to 225 MHz (including deep color modes) HDMI audio can be selected as source for audio streaming Incorporates TMDS equalizer to support up to 65.6' (20 m) cables DVI: Supports DVI 1.0 RGB 24-bit capture to 165 MHz Incorporates TMDS equalizer to support up to 65.6' (20 m) cables VGA/ YPbPr: Triple ADCs sampling up to 170 Mp/s, full 4:4:4 sampling, 8-bits per color 5-wire, 4-wire or sync-on-green signal format Composite Video: CCIR601 sampling, PAL, NTSC, SECAM formats automatically detected Audio: Stereo Line-In / Stereo balanced inputs with programmable gain (+/-12 dB) 16-bit sampling at 44.1, 48, 96 kHz Analogue stereo line-out for direct pass-through of selected input at up to 64 kHz sampling, sourced from Analog input or HDMI channel | Video Capture | Memory: 256 MB high bandwidth frame buffer supports triple buffering of HD and SD video Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead) | Video Processing | Polyphase FIR scaling engine (7 x 5) for hardware downscaling and upscaling Color space conversion allows captured data to be transferred in any format: RGB: 16-bit (5-5-5, 5-6-5), 24-bit (8-8-8) or 32-bit (8-8-8 alpha) YUV: 16-bit (4:2:2) Mono: 8-bit | Direct Memory Access | Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800 MB/s 16 independent DMA streams: Any mix of HD and SD sources, color space, cropping and scaling parameters | Operating System Support | Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support | Power Requirements | Max current at 12 V - 1 A Max current at 3.3 V - 1 A | Thermal Dissipation | 15.5 W | Temperature | Operating: 32 to 96°F (0 to 35°C) Storage: -4 to 158°F (-20 to 70°C) | Relative Humidity | 5 - 90%, non-condensing | Dimensions | 4.3 x 6.7" (11.0 x 17.0 cm) | |
The user manual for the DATAPATH VisionAV-HD Capture Card VISIONAV-HD can be downloaded in .pdf
format if it did not come with your new multi viewer accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DATAPATH users keep a unique electronic library
for DATAPATH multi viewer accessoriess,
where you can use our link to download the user manual for the DATAPATH VisionAV-HD Capture Card VISIONAV-HD.
The user manual lists all of the functions of the DATAPATH VisionAV-HD Capture Card VISIONAV-HD,
all the basic and advanced features and tells you how to use the multi viewer accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DATAPATH service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DATAPATH VisionAV-HD Capture Card VISIONAV-HD. User manuals are also
available on the DATAPATH website under A/V Presentation - Signal Processing & Distribution - Multi Viewer Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the DATAPATH VisionAV-HD Capture Card VISIONAV-HD - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the DATAPATH VisionAV-HD Capture Card VISIONAV-HD
|
|
|
|
|