|
User manual for DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194
- Manufacturer: DSI RF Systems
- Basic description and contents of package
- Product classification: Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems
- Safety instructions
- Startup and operation of the wireless transmission systems
- Tips for setting up your DSI RF Systems
- Settings and expert assistance
- Contact DSI RF Systems service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194,
which address similar problems with connecting and setting up Wireless Transmission Systems DSI RF Systems.
|
User manual for the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194
The user manual for the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194 provides
necessary instructions for the proper use of the product Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems.
The DSI RF Systems NewsShark HD Encoder with WiFi / 4G Verizon Modem is a compact and efficient transmission system that can very conveniently and with total success serve both broadcast and security surveillance applications. It encodes live video and audio recordings and wirelessly transmits them back to the studio (or command center) in real-time, encoding in H.264 and AAC formats and streaming by internet connectivity through a separately-sold NewsShark Decoder. Along the transmission, image quality gets auto-adjusted to compensate for any bandwidth variations, and video gets delivered at qualities higher than that of cell phone footage.
The Encoder features two modem slots. At anytime, you can optionally upgrade any modems in them. The unit you've clicked into comes with WiFi and a 4G Verizon modem already installed. You can activate either or both and switch between the two as you see fit.
Upon your purchase of the Encoder, you will be presented with one of three mount types to choose from at no additional cost. Please pick the one specific to your intended use. You can select a V-Mount or an Anton Bauer Mount, depending on the type of camera you use, or a Shoulder Strap Mount if you mean to carry the Encoder instead of attaching it to a camera. Furthermore, following receipt of your order, DSI RF Systems will contact you and will provide you with SIM card information for setting up your modems.
|
If you own a DSI RF Systems wireless transmission systems and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194:
Format | NTSC | Impedance | 75 Ohms, terminating | Connector | Composite BNC female chassis | Level | 1 volt peak to peak Digital: 800 mV peak to peak | Configuration | Mono analog | Input Level | Switchable mic/line in | Frequency Response | 50 Hz to 7.5 kHz | Input Connector | Neutrik combination XLR-F balanced or 1/4" phone unbalanced | Line Input Level | -10 to +4dBu adjustable, bridging | Line Output Level | -10 to +4dBu adjustable, Lo-Z | Configuration | Mono analog | Reporter | Headphone only | Camera Operator | Microphone and headphone | Frequency Response | 50 Hz to 7.5 kHz | Connectors | 3.5 mm, 3 conductor mini plug 1/8" | Impedance | Bridging | Input Level | Microphone | Output Level | Adjustable Lo-Z headphone output | Compression Protocol | H.264 (MPEG4 AVC) with AAC audio coding Variable bit rate | Video Bit Rate Range | 25 kbps - 1.1 Mbps (3G), 25 kbps - 5 Mbps (4G) | Audio Bit Rate Range | 16 kbs per channel (IFB is considered part of the audio chain) | Overall Bit Rate Range | 75 kbps to 5.5 Mbps | Video Frame Rate Range | 1 to 30 fps | Audio Sampling Rate | 16 kHz | Resolution | NTSC/525 variable/720p | Robustivity Presets | Adjustable from the front panel | End to End Latency | 1 to 4 seconds (subject to transmission conditions) | Codec Settings | Variable GOP and frame rate, set by Robustivity | Codec Interoperability | None, due to duplex IFB path and communications between the encoder and optional decoder to optimize network traffic and bandwidth | FCC Compliance | Part 15 compliant | Antenna Type | Low-profile integrated gain antenna, vertically polarized | Impedance | 50Ω | Gain | 3 dBi | Diversity | Receive diversity only | Diversity Connector | SMA female screw-on type | Network Requirements | Most major US wireless providers | Network Types | EVDO, HSDPA+, 4G LTE, WiMax | Wi-Fi Protocols | 802.11 b/g/n | FCC License | No end-user license required | Protocols | RTP/UDP/IPv4 | Encoder/Decoder | Both the Encoder and an optional Decoder requires static IP addressing (a dedicated broadband Internet connection is strongly suggested) | Display | Graphic backlit LCD .77 x 1.28" (1.95 x 3.25 cm) | Item Select | Illuminated pushbutton | Status Indicators | Multi-function LCD and status LEDs | Menu Select | Digital rotary encoder | IFB Volume | Individual controls for both camera operator and talent | Voltage | 12 - 36 VDC | Power Consumption | 3 watts | Power On/Off | 5 second Power On/Off push button | Boot-Up Period | 50 seconds | Run Time | Estimated at least 3 hours with 3G connected | Internal Battery | Lithium-ion | External DC Source | Vehicle, other Industry-standard battery mount with pass-thru of DC voltage and signaling | Connector | Coaxial screw-on type | Rack Mount Connector | Phoenix captive | Configuration | Camera back style (industry-standard battery mount) Shoulder strap carry style | Durability | Recessed connector protection | Environmental | Weather-tight, not weather-proof | Material | Powder coated aluminum Protective urethane sides | Dimensions | 4.25 x 4.75 x 7.5" (10.8 x 12 x 19 cm) | Weight | 2.5 lbs (1.13 kg) | Package Weight | 4.0 lb | Box Dimensions (LxWxH) | 11.0 x 9.0 x 8.0" | |
The user manual for the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194 can be downloaded in .pdf
format if it did not come with your new wireless transmission systems, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DSI RF Systems users keep a unique electronic library
for DSI RF Systems wireless transmission systemss,
where you can use our link to download the user manual for the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194.
The user manual lists all of the functions of the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194,
all the basic and advanced features and tells you how to use the wireless transmission systems.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DSI RF Systems service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194. User manuals are also
available on the DSI RF Systems website under Professional Video - Camcorder & Camera Peripherals - Wireless Transmission Systems.
Question and answer discussion forum concerning user instructions and resolving problems with the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the DSI RF Systems NewsShark HD Encoder with WiFi / DS-NSENHD-7194
|
|
|
|
|