|
User manual for Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174
- Manufacturer: Electro-Voice
- Basic description and contents of package
- Product classification: Pro Audio - Installation Sound - 70-Volt Amplifiers
- Safety instructions
- Startup and operation of the 70-volt amplifiers
- Tips for setting up your Electro-Voice
- Settings and expert assistance
- Contact Electro-Voice service
- Troubleshooting
- Warranty information
- Price: 645 USD
|
We recommend checking out our discussion threads on the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174,
which address similar problems with connecting and setting up 70-Volt Amplifiers Electro-Voice.
|
User manual for the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174
The user manual for the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174 provides
necessary instructions for the proper use of the product Pro Audio - Installation Sound - 70-Volt Amplifiers.
The PA2250T from Electro Voice is a high-quality rack mountable power amplifier that's perfectly suited for schools, houses of worship, retail spaces, offices, and more. This two-channel amplifier has a simple, easy to use interface with the power switch and indicator LEDs on the front panel, and level control and a high-pass filter switch on the rear. There is also a three-way switch that allows you to choose from stereo, dual mono, or bridged mono operating modes. The input and output connectors consist of simple Phoenix connectors for quick and easy setup.
Comprehensive protection circuitry protects your amplifier from damage caused by overheating and overloads. The output has a delayed connection at power-up to prevent damage to your speakers. A front-to-rear airflow keeps the amplifier cool and running smoothly. Most importantly, the PA2250T uses high-performance components to give you excellent sound with low noise and distortion. For efficient sound reinforcement in a package that's easy to use, the PA2250T is a great option.
|
If you own a Electro-Voice 70-volt amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174:
Output Power | 4 Ohm: 270W 8 Ohm: 135W 70V: 270W 100V: 270W | Damping Factor | > 250 @ 100Hz/1kHz, 4 Ohms | Input Sensitivity | 0dBu (775mV) @ Rated Output, 1kHz | Input Impedance | > 20 kOhms | Gain | Not Specified by Manufacturer | Frequency Response | 65Hz - 20kHz (70V, 100V) 65Hz - 40kHz (4 Ohms, 8 Ohms) | Signal-to-Noise Ratio | 103dB | Total Harmonic Distortion (THD) | < 0.1% | Input Connections | 1 x Power Input 2 x 3-Pin Phoenix Connectors | Output Connectors | 1 x 12-Pin Phoenix Connector | Controls Front Panel | 1 x Power Switch | Controls (Rear) | 1 x Voltage Selector Switch 1 x 3-Way Mode Selector Switch 1 x 3-Way HP Filter Switch 2 x Level Control Knobs | Indicators | 2 x Green Power LEDs 4 x Green Signal LEDs 2 x Red Limit LEDs 2 x Red Protect LEDs | Cooling | Front-to-Rear | Power | 120 or 230V, 50-60Hz | Dimensions (HxWxD) | 3.5 x 19 x 16" (89 x 483 x 406mm) | Weight | 51.7 lbs (23.5kg) | Package Weight | 59.7 lb | Box Dimensions (LxWxH) | 22.8 x 22.3 x 7.4" | |
The user manual for the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174 can be downloaded in .pdf
format if it did not come with your new 70-volt amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Electro-Voice users keep a unique electronic library
for Electro-Voice 70-volt amplifierss,
where you can use our link to download the user manual for the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174.
The user manual lists all of the functions of the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174,
all the basic and advanced features and tells you how to use the 70-volt amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Electro-Voice service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174. User manuals are also
available on the Electro-Voice website under Pro Audio - Installation Sound - 70-Volt Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Electro-Voice PA2250T - 2 x 270W Power Amplifier F.01U.120.174
|
|
|
|
|