|
User manual for Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4
- Manufacturer: Ikelite
- Basic description and contents of package
- Product classification: Photography - Underwater Photography - Strobe Lights
- Safety instructions
- Startup and operation of the strobe lights
- Tips for setting up your Ikelite
- Settings and expert assistance
- Contact Ikelite service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4,
which address similar problems with connecting and setting up Strobe Lights Ikelite.
|
User manual for the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4
The user manual for the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4 provides
necessary instructions for the proper use of the product Photography - Underwater Photography - Strobe Lights.
Add a flash to any Ikelite compact or DSLR camera housing featuring their proprietary TTL electrical bulkhead, thanks to this DS160 Strobe Kit. The package bundles the DS160 strobe, 2nd-Gen li-ion battery, charger, 7" Double Ball Arm Mark II with clamps and mounts, and diffuser. Grab an optional Ikelite 5-pin TTL sync cord, and you'll be ready to connect the strobe to your underwater camera housing. The TTL/manual DS160 strobe has a 300' depth rating. It features a round flash tube and a custom powder-coated reflector designed to deliver soft, even coverage. The strobe has a power rating of 160 watt-sec and a guide number of 76' at ISO 100. The 90° coverage angle is increased to 100° with the supplied diffuser, which also softens the beam to prevent backscatter, glare, and hard shadows. Additionally, the DS160 is warmer than daylight at a color temperature of 4800K, and will help you correct the blue color cast that occurs beneath the surface by restoring hues that get absorbed. A bright, concentrated LED aiming light works well for focusing or as a night diving aid, and turns off when the strobe is fired to prevent hot spots. The high-capacity battery pack and the TTL flash exposure enabled by sync cord connection allow for the high-speed shooting necessary to capture fast-moving subjects, such as sharks and eels. To shoot with two strobes, you can use the optional TTL Dual Sync Cord. If you opt for manual mode, you can select from 10 power settings in half-stop increments. The 7.4V li-ion battery has a fast recycle time of 1.4 sec and provides over 450 full-power flashes on a single charge. This 2nd-generation lithium-ion pack features improved cell-conditioning technology to keep you on the go and increase the lifetime of the battery. A quick-release toggle system makes quick, easy work of attaching the battery and also virtually ensures that flooding will not occur. The Smart Charger runs on 100-240VAC power for worldwide use and includes adapter plugs for North America, Europe, the UK, and Australia. It is a 2nd-generation charger and is compatible with 1st-gen li-ion packs, but it will not provide charge termination feedback for 1st-gen packs via the LED indicator Ikelite's 7" double ball-jointed arm includes 2 ball clamps that enable attachment to the supplied strobe mount and Ikelite quick-release handle mount. When all parts are assembled together, the overall length of the arm is about 15". Optional extra arm components and clamps can be added for greater length and different lighting angles and positions. The ball mounts/joints measure 1" in diameter and have a groove and o-ring to prevent slipping for a better hold with less force. The arm and its parts are made from aluminum that has been treated with a hard type III anodized finish for resistance to corrosion.
|
If you own a Ikelite strobe lights and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4:
Package Weight | 4.2 lb | Box Dimensions (LxWxH) | 11.653 x 6.378 x 6.378" | |
The user manual for the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4 can be downloaded in .pdf
format if it did not come with your new strobe lights, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Ikelite users keep a unique electronic library
for Ikelite strobe lightss,
where you can use our link to download the user manual for the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4.
The user manual lists all of the functions of the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4,
all the basic and advanced features and tells you how to use the strobe lights.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Ikelite service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4. User manuals are also
available on the Ikelite website under Photography - Underwater Photography - Strobe Lights.
Question and answer discussion forum concerning user instructions and resolving problems with the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Ikelite DS160 Substrobe with 2nd-Gen Li-Ion Battery and 4060.4
|
|
|
|
|