|
User manual for Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1
- Manufacturer: Interlogix
- Basic description and contents of package
- Product classification: Surveillance - Surveillance Video - Video Transmission - Signal Extenders
- Safety instructions
- Startup and operation of the signal extenders
- Tips for setting up your Interlogix
- Settings and expert assistance
- Contact Interlogix service
- Troubleshooting
- Warranty information
- Price: 515 USD
|
We recommend checking out our discussion threads on the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1,
which address similar problems with connecting and setting up Signal Extenders Interlogix.
|
User manual for the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1
The user manual for the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1 provides
necessary instructions for the proper use of the product Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
The General Electric S732DV 1-Channel Fiber Optic Video / Data Transmitter (Standalone) supports one-way transmission of video and two-way transmission of multiprotocol data over a single fiber. Moreover, it supports multimode operation. The transmitter supports resolutions of up to 520 TVL, and features Optical Automatic Gain Control (OAGC) that helps compensate for loss in signal strength. It has an operating distance of 4.0 miles (6.5 km).
With 6.5 MHz of video bandwidth and 8-bit video processing, the transmitter ensures clean, noise-free video to the receiver. Data translation allows data to be easily converted from one format to another, while data formats selected during installation can be changed in the field via a rotary switch.
Support for major video formats means that the transmitter can be retained even if the video control system is changed. You can easily monitor the operating status of the system using SMARTS diagnostic technology, which comes with several built-in diagnostic tools including LEDs and a video test pattern generator. The transmitter comes in a standalone configuration and features a polycarbonate construction.
|
If you own a Interlogix signal extenders and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1 in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1:
Channels | 1 simplex | Format | NTSC and PAL | I/O | 1.0 V pk - pk | Bandwidth | 6.5 MHz | SNR | >55 dB | Video Resolution | 520 TVL | I/O Impedance | 75 ohms | Differential Phase | <3° | Differential Gain | <3% | Channels | 1 duplex | Formats | RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire), Manchester, Biphase, SensorNet, DTMF control | Baud Rate | 250 to 512 kbps or 15 kHz (depending on data format) | Bit Error Rate | <1.0E-9 | Mode | Multimode | Optical Budget | 13 dB | Emitter Outputs | LED or Laser | Wavelength | 850 nm and/or 1300 nm | Operating Distance | Up to 4.0 miles (6.5 km) | Gain Control | Optical Automatic Gain Control (OAGC) | Launch Power(dBm) | -15 | Input Power | 24 VAC or 13.5 VDC regulated | Current Requirements | 450 mA | Power Consumption | 6 W | Protection | Solid-state short circuit protection | Operating Temperature | -40 to 167°F (-40 to 75°C) | Humidity | 95% relative, noncondensing (maximum) | Construction | Polycarbonate | Weight | 1.2 lb (0.54 kg) | Dimensions | 5.0 x 4.8 x 1.5" (127 x 122 x 38 mm) | |
The user manual for the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1 can be downloaded in .pdf
format if it did not come with your new signal extenders, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Interlogix users keep a unique electronic library
for Interlogix signal extenderss,
where you can use our link to download the user manual for the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1.
The user manual lists all of the functions of the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1,
all the basic and advanced features and tells you how to use the signal extenders.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Interlogix service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1. User manuals are also
available on the Interlogix website under Surveillance - Surveillance Video - Video Transmission - Signal Extenders.
Question and answer discussion forum concerning user instructions and resolving problems with the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1 - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Interlogix S732DV 1-Channel Fiber Optic Video / Data S732DVTEST1
|
|
|
|
|