|
User manual for MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST
- Manufacturer: MultiDyne
- Basic description and contents of package
- Product classification: Professional Video - Signal Processing & Distribution - Video Extenders & Repeaters
- Safety instructions
- Startup and operation of the video extenders & repeaters
- Tips for setting up your MultiDyne
- Settings and expert assistance
- Contact MultiDyne service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST,
which address similar problems with connecting and setting up Video Extenders & Repeaters MultiDyne.
|
User manual for the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST
The user manual for the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST provides
necessary instructions for the proper use of the product Professional Video - Signal Processing & Distribution - Video Extenders & Repeaters.
The HD-3500-FTX-ST Multi-Rate Serial Video & Fiber-Optic Transmitter from MultiDyne routes all of the signals needed to any remote camera and its operator, up to 24.9 miles (40km) away from its base station. 3G HD uncompressed videos are transported without any loss or degradation of the signal. This unit supports 3 discreet bi-directional—RS-232, 422, and 485—data channels as well as 4 GPIO’s and one tally. Data paths and GPIO channels allow for easy remote control of critical camera parameters and the tally circuit lets the camera operator know when the system is live.
|
If you own a MultiDyne video extenders & repeaters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST:
Number of Inputs | 1 with loop out, dual outs | Interface | SMPTE 424M, 297M, 292M, M259M-C, DVB-ASI | Input | Coax EQ: @3 Gb/s for 262.47' (80.00 m) @1.485 Gb/s for 492.13' (150.00 m) @143 to 360 Mb/s for 1,148.29' (350.00 m) Level: 100 mV (peak to peak) | Impedance | 75 Ω | Bit Error Rate | 10-12 | Jitter | <0.03IU under 1 MHz | Rise / Fall time | <270 ps | Return Loss | >15 dB at 5 MHz to 1.485 GHz >10 dB up to 3 GHz | Data Channels | RS-232, 422, 485 with DC to 3 Mb/s | Input Voltage | 232: ±25 V maximum, 2 V minimum 422, 485: -7 to 12 V, 0.2 V diff minimum | Output Voltage | 232: ±5 V @ 3 kΩ, 1.6 V sens | GPIO | Normally open, Form 1 SPST | S/N | >90 dB | Frequency Response | <±0.1 dB (20 Hz to 20 kHz) | Distortion | <0.05% | Level | Adjust: 28, 16, 10, 4 dBu Maximum I/O: 28 dBu | Impedance | Input: >600 Ω (balanced) Output: <10 Ω (balanced) | Intercom | Level: 4 dBu FS Input Impedance: 10 kΩ Output Impedance: <50 Ω | Input/Output | Balanced, AES3/AES3id | Impedance | Input/Output: 110 Ω / 75 Ω (DIP Sw) ±20%, 0.1 to 6.0 MHz | Input | Minimum / Maximum: 2 to 7 Vpp into 110 Ω | Rise / Fall time | 5 to 30 ns for 10 Ω | Jitter | <20 ns | Operating Wavelength | DFB 1,271 to 1,591 nm | Transmitter | Laser Output Power: -2 to 0 dBm, Class 1 | Compatibility | Fiber: Single mode | Optical Connector | ST | Distance Limitation | Up to 24.9 miles (40.0 km) | Connectors | Video: BNC Audio/Data: DB-44F | Temperature Range | -13 to 131°F (-25 to 55°C) | Humidity Range | 0 to 95% RH (non condensing) | Power Input | 2.5 mm jack Center pin + | Power Rating | Nominal: 50 W maximum @ 14 VDC | Power Requirement | <10 W @ 5 to 24 VDC | Dimensions (L x W x H) | 6.75 x 5.50 x 1.75" (171.45 x 139.70 x 44.45 mm) | Weight | 1.50 lb (0.68 kg) | Package Weight | 3.35 lb | Box Dimensions (LxWxH) | 13.4 x 9.7 x 2.3" | |
The user manual for the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST can be downloaded in .pdf
format if it did not come with your new video extenders & repeaters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other MultiDyne users keep a unique electronic library
for MultiDyne video extenders & repeaterss,
where you can use our link to download the user manual for the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST.
The user manual lists all of the functions of the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST,
all the basic and advanced features and tells you how to use the video extenders & repeaters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from MultiDyne service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST. User manuals are also
available on the MultiDyne website under Professional Video - Signal Processing & Distribution - Video Extenders & Repeaters.
Question and answer discussion forum concerning user instructions and resolving problems with the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the MultiDyne HD-3500-FTX-ST Multi-Rate Serial Video HD-3500-FTX-ST
|
|
|
|
|