|
User manual for RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT
- Manufacturer: RME
- Basic description and contents of package
- Product classification: Pro Audio - Computer Audio - AD/DA Converters
- Safety instructions
- Startup and operation of the ad/da converters
- Tips for setting up your RME
- Settings and expert assistance
- Contact RME service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT,
which address similar problems with connecting and setting up AD/DA Converters RME.
|
User manual for the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT
The user manual for the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT provides
necessary instructions for the proper use of the product Pro Audio - Computer Audio - AD/DA Converters.
The 1RU MADI-RT 12-Channel Digital Patch Bay Router and Format Converter from RME Audio is designed to interconnect MADI devices of any manufacturer, providing flexible signal routing. It serves as a format converter between optical and electrical signals, as a signal repeater, and as a distributor and merger of several MADI signals. The MADI Router combines advantages of point-to-point audio connections, such as low latency and fast recovery time from signal line interruptions, with the flexibility of networked audio connections in which any device has access to any channel available on the network of connected devices.
At the most basic level, input signals are passed on to the desired output unaltered. This type of connection is beneficial when manufacturers have embedded additional status or remote control data information in the MADI stream. It is also possible to create new arrangements of audio channels within a MADI output stream. For this purpose four independent matrices are provided, each one reflecting 768 IN x 64 OUT audio channels. Any channel of any valid MADI input stream may act as source to each crosspoint matrix. The output of each matrix can then be passed on to any of the 12 MADI Router's outputs.
|
If you own a RME ad/da converters and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT:
| Input Connectors | MADI
4 x BNC; 75 ohm, < 0.2 Vpp, AES10-1991
4 x Duplex SC optical FDDI; 62.5/125 and 50/125 multimode compatible
Note: Both Optical and Coaxial ports accept any MADI signal
4 x RJ45; 8-pin twisted pair (input and output)*
Word Clock
1 x BNC; input not terminated (10 kOhm), level range 0.7 - 3.3 Vpp
*Twisted Pair implementation uses standard Ethernet technology such as 8b/10b encoding for DC-balance, which is important to achieve stability over long cable runs. | | Input Control | 1 x switch; internal termination 75 ohm | | Output Connectors | MADI
4 x BNC; 75 ohm, 750 mVpp, AES10-1991
4 x Duplex SC optical FDDI; 62.5/125 and 50/125 multimode compatible
Wordclock
1 x BNC; 10 ohm impedance, 27 – 200 kHz
Output Voltage @ 75 ohm: 1.65 Vpp
Max. Output Voltage: 3.3 Vpp | | Maximum Cable Length | Coaxial (BNC): 656.2' (200 m)
Fiber (Duplex SC): 6,561.7' (2,000 m) | | Power Supply | 100 - 240 VAC, 100 W (maximum), 2 x internal redundant power supplies | | Operating Temperature | 41 to 122°F (5 to 50°C) | | Relative Humidity | < 75% | | Dimensions (W x H x D) | Without Rack Ears: 17.3 x 1.73 x 9.45" (44.0 x 4.4 x 24.0 cm) | | Weight | 6.2 lb (2.8 kg) | |
The user manual for the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT can be downloaded in .pdf
format if it did not come with your new ad/da converters, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other RME users keep a unique electronic library
for RME ad/da converterss,
where you can use our link to download the user manual for the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT.
The user manual lists all of the functions of the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT,
all the basic and advanced features and tells you how to use the ad/da converters.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from RME service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT. User manuals are also
available on the RME website under Pro Audio - Computer Audio - AD/DA Converters.
Question and answer discussion forum concerning user instructions and resolving problems with the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the RME MADI-RT 12-Channel Digital Patch Bay Router and MADI-RT
|
|
|
|
|
