|
User manual for Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO
- Manufacturer: Whirlwind
- Basic description and contents of package
- Product classification: Pro Audio - Musical Instruments - Guitar Accessories - Effects Pedal Accessories
- Safety instructions
- Startup and operation of the effects pedal accessories
- Tips for setting up your Whirlwind
- Settings and expert assistance
- Contact Whirlwind service
- Troubleshooting
- Warranty information
- Price: 496 USD
|
We recommend checking out our discussion threads on the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO,
which address similar problems with connecting and setting up Effects Pedal Accessories Whirlwind.
|
User manual for the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO
The user manual for the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO provides
necessary instructions for the proper use of the product Pro Audio - Musical Instruments - Guitar Accessories - Effects Pedal Accessories.
The MultiSelector PRO 4 x 1 Instrument Switcher from Whirlwind is a unidirectional, 4-to-1 instrument switcher incorporating innovative features. The one rack space MultiSelector PRO Switcher allows selection of any 1 of 4 inputs to a single output. Each of the 4 inputs is electronically buffered with an input impedance of 1 MΩ, delivering pristine frequency response when used with instruments with passive pickups. Signals pass through the unit transparently with no coloration and the digitally controlled optical switching is completely silent. A low noise floor and high channel isolation make the MultiSelector PRO Switcher suitable for most professional applications. The switcher features 4 momentary switches on the front panel to select between channels, with the active channel identified by a red LED. Activating a channel disconnects the previous selection. A separate, green LED indicates connection of the the MultiSelector MLTSELPRO4XR Remote Foot Controller (sold separately). The rear panel contains the 4 unbalanced 1/4” input jacks, the 1/4” output jack, and a female XLR connector for connecting the remote footswitch (sold separately). The unit is AC powered for ultimate performance with no external wall wart needed. The MLTSELPRO is set for 120V operation. The MultiSelector PRO also features an individually buffered tuner output on both the front and rear panels. All 3 non-active inputs are routed to the tuner outputs so a guitar tech can tune any non-active instrument by just turning up its volume. This output is electronically isolated from the main signal path. It is not necessary to unplug the cable or wireless transmitter from the instrument to tune and then plug back in to the instrument.
|
If you own a Whirlwind effects pedal accessories and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO:
Insertion Loss | -0.35 dBV | Frequency Response | Main Output: ±0.1 dBv, 20 to 20 kHz | THD + N | <0.003%, 20 to 20 kHz | Noise | Main Output: <-112 dBV | Attenuation | Off Channel (Main Output): >109 dBV | Crosstalk (Main Outputs) | >109 dBV at 1 kHz | Rise Time | 320 ns | Maximum Input/Output Level | 13.7 dBV | Input Impedance | 1 MΩ | Output Impedance | Main and Tuner: 100 Ω | Power Consumption | 10.1 W, 0.081 A at 120 VAC | Voltage | AC Dropout: 103 VAC | Dimensions (W x H x D) | 19.0 x 1.8 x 5.5" (482.6 x 44.5 x 139.7 mm) | Weight | 7.0 lb (3.2 kg) | Package Weight | 2.444 lb | Box Dimensions (LxWxH) | 22.0 x 9.5 x 5.0" | |
The user manual for the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO can be downloaded in .pdf
format if it did not come with your new effects pedal accessories, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Whirlwind users keep a unique electronic library
for Whirlwind effects pedal accessoriess,
where you can use our link to download the user manual for the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO.
The user manual lists all of the functions of the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO,
all the basic and advanced features and tells you how to use the effects pedal accessories.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Whirlwind service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO. User manuals are also
available on the Whirlwind website under Pro Audio - Musical Instruments - Guitar Accessories - Effects Pedal Accessories.
Question and answer discussion forum concerning user instructions and resolving problems with the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the Whirlwind MultiSelector PRO 4 x 1 Instrument Switcher MLTSELPRO
|
|
|
|
|