|
User manual for DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
- Manufacturer: DJI
- Basic description and contents of package
- Product classification: Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones
- Safety instructions
- Startup and operation of the aerial imaging platforms & drones
- Tips for setting up your DJI
- Settings and expert assistance
- Contact DJI service
- Troubleshooting
- Warranty information
Click to enlarge image
|
We recommend checking out our discussion threads on the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal,
which address similar problems with connecting and setting up Aerial Imaging Platforms & Drones DJI.
|
User manual for the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal
The user manual for the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal provides
necessary instructions for the proper use of the product Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones.
Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera.
As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an "indoor" mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode).
This bundle includes the Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more.
|
If you own a DJI aerial imaging platforms & drones and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal:
Hovering Accuracy (GPS Mode) | Vertical: 1.6' / 0.5 m Horizontal: 8.2' / 2.5 m | Maximum Angular Velocity | Pitch: 300°/s Yaw: 150°/s | Maximum Tilt Angle | 35°/s | Maximum Ascent/Descent Speed | Ascent: 16.4 fps / 5 m/s Descent: 13.1 fps / 4 m/s | Maximum Speed | 72.2 fps / 22 m/s (Attitude mode; no wind) | Maximum Flight Altitude | 14,764' / 4,500 m | Maximum Wind Speed Resistance | 32.8 fps / 10 m/s | Maximum Flight Time | With Zenmuse X3: Up to 18 minutes With Zenmuse X5/X5R: Up to 15 minutes | Model | Name: X3 Designation: FC350 | Sensor | Sony EXMOR 1/2.3" CMOS | Resolution | 12.0 MP | Lens | Field of View: 94° Focal Length (35 mm Equivalent): 20 mm Aperture: f/2.8 Design: 9 elements in 9 groups; aspherical lens element Filters: Anti-distortion filter; UV filter | Video Recording | UHD (4K): 4096 x 2160: 24p, 25p 3840 x 2160: 24p, 25p, 30p
FHD (1080p): 1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60p
HD (720p): 1280 x 720: 24p, 25p, 30p, 48p, 50p, 60p
Maximum Bitrate: 60 Mbp/s | File Format | Photo: JPEG, DNG Video: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264) | Recording Media | Type: microSD/SDHC/SDXC up to 64 GB Speed: Class 10 or faster Format: FAT32/exFAT | Photography Modes | Single shot Burst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias) Time-lapse | Operating Temperature | 32 to 104°F / 0 to 40°C | Model | Zenmuse X3 | Number of Axes | 3-axis | Control Accuracy | ±0.03° | Maximum Controlled Rotation Speed | Pitch: 120°/s Pan: 180°/s | Controlled Rotation Range | Pitch: -90° to +30° Pan: ±330° | Angular Vibration Range | ±0.03° | Output Power | Static: 9 W In Motion: 11 W | Operational Current | Static: 750 mA In Motion: 900 mA | Mounting | Detachable | Indoor Hovering | Enabled by default | Optical Sensor (Optical Flow) | Frequency: 50 Hz Velocity Range: Below 26.2 fps / 8 m/s (6.6' / 2 m above the ground) Altitude Range: 2 to 196.8" / 5 to 500 cm
Operating Environment: Rich pattern surface with adequate lighting (> 15 lux) Operating Range: 0 to 8.2' / 0 to 2.5 m | Model | DJI 3510 | Motor Velocity Constant | 350 Kv | Maximum Thrust | 4.6 lb / 2100 g at 25 V and sea level | Weight | 3.6 oz / 102 g | Operating Frequency | Transmitter to Transmitter: 5.728 to 5.850 GHz Transmitter to Aircraft: 2.400 to 2.483 GHz | Range | Line-of-Sight: Up to 6561.7' / 2000 m | Receive Sensitivity | 1% PER:-93 dBm | EIRP | 10 dBm at 900 MHz; 8 dBm at 5.8 GHz; 20 dBm at 2.4 GHz | Connectivity | 1 x USB type A female (for connecting mobile device) 1 x Micro-USB for firmware updates 1 x Mini-HDMI video output for FPV 1 x CAN-Bus port (for future accessory) | Dual User Capability | Host-and-slave connection | Mobile Device Holder | Tablet or smartphone | Output Power | 9 W | Power Requirements | 1.2 A at 7.4 VDC | Battery | 6S LiPo; 6000 mAh | Charging Temperature | Less than 3 Months: -4 to 113°F / -20 to 45°C More than Three Months: 72 to 82°F / 22 to 28°C | Storage Temperature | Less than 3 Months: -4 to 113°F / -20 to 45°C More than 3 Months: 72 to 82°F / 22 to 28°C | Mobile Device Holder | Device Width: 2 to 6.7" / 5 to 17 cm | Model | TB47 | Voltage | 6S LiPo; 22.2 VDC | Capacity | 4500 mAh / 99.9 Wh | Maximum Charging Power | 180 W | Operating Temperature | -4 to 104°F / -20 to 40°C | Storage Temperature | -4 to 113°F / -20 to 45°C 72 to 82°F / 22 to 28°C | Charging Temperature | 32 to 104°F / 0 to 40°C | Weight | 1.3 lb / 570 g | Model | A14-100P1A | Voltage | 26.3 VDC | Output Power | 100 W | System Requirements | iOS: 7.1 or later Android: 4.1.2 or later
Note: The device must be connected to a transmitter via USB (wireless linking is not supporting). Additionally, waypoint navigation requires an active Internet connection in order to load the maps | Model | Aircraft: T600 | Operating Temperature | 14 to 104°F / -10 to 40°C | Dimensions | Diagonal Distance: Landing Gear Lowered: 22" / 559 mm Landing Gear Raised: 22.9" / 581 mm
Overall Dimensions: 17.2 x 17.8 x 11.9" / 438 x 451 x 301 mm
Transit Case: Exterior: 22.4 x 19.7 x 10.6" / 57 x 50 x 27 cm | Weight | With Battery: 6.5 lb / 2.9 kg | Package Weight | 20.0 lb | Box Dimensions (LxWxH) | 23.307 x 20.945 x 11.811" | |
The user manual for the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal can be downloaded in .pdf
format if it did not come with your new aerial imaging platforms & drones, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other DJI users keep a unique electronic library
for DJI aerial imaging platforms & droness,
where you can use our link to download the user manual for the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal.
The user manual lists all of the functions of the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal,
all the basic and advanced features and tells you how to use the aerial imaging platforms & drones.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from DJI service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal. User manuals are also
available on the DJI website under Camcorders - Aerial Imaging & Drones - Aerial Imaging Platforms & Drones.
Question and answer discussion forum concerning user instructions and resolving problems with the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal - no comments have been made yet - be the first to add a comment
Post new comment/question/response regarding the DJI Inspire 1 Quadcopter with 4K Camera and Inspire 1 3-Axis Gimbal
|
|
|
|
|