User manual Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2
Operating instructions and pdf manual for use - Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2 User manual, User manual Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2, Elinchrom, D-Lite, RX, 2, 2-Light, To, Go, Kit, wi
User manual for Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2
We recommend checking out our discussion threads on the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2,
which address similar problems with connecting and setting up Monolight Kits Elinchrom.
User manual for the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2
The user manual for the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2 provides
necessary instructions for the proper use of the product Lighting & Studio - Strobe Lighting - Monolight Kits.
The D-Lite RX 2 2-Light To Go Kit with Standsand Bags from Elinchrom is a lightweight, portable strobe kit with two 200W/s D-Lite RX 2 portable flashes, two light stands, a Skyport ELS Speed Transmitter for wireless triggering of your strobes, two 26 x 26" softboxes, and a wide-angle 90 degree reflector. You also get a sync cord, a bag to protect your light stands and a carrying case for storing and transporting the heads.
If you own a Elinchrom monolight kits and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2 in the following formats:
*.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
Additional parameters of the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2:
Specifications
2 x
D-Lite 200W/s RX 2 Flash Head
Maximum Watt/Seconds
200
Flash Variability
5.0 Stops in 1/10th stop increments (12 - 200W/s)
Recycle Time
@ 230V: 0.2 - 0.6 sec @ 115V: 0.2 - 0.8 sec
Flash Duration
1/1,200 Sec.
Voltage Stabilization
0.5%
Auto Dump
Yes
Power Requirements
Multi voltage, 90-260VAC
Modeling Light Wattage
100W Control: Proportional, Low, Full, On/Off
User Replaceable Flashtube
Yes
Umbrella Mount
Centered tub, for EL-umbrellas 7.0 mm diameter Extra fitting on bracket for larger sized shafts
Sync Voltage
5.0V Compatibility with digital cameras
Power Consumption
115VAC, 60Hz: No flash / recycling 160W / 850VA 230VAC, 50Hz: No flash / recycling 140W / 1,200VA
The user manual for the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2 can be downloaded in .pdf
format if it did not come with your new monolight kits, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Elinchrom users keep a unique electronic library
for Elinchrom monolight kitss,
where you can use our link to download the user manual for the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2.
The user manual lists all of the functions of the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2,
all the basic and advanced features and tells you how to use the monolight kits.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Elinchrom service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2. User manuals are also
available on the Elinchrom website under Lighting & Studio - Strobe Lighting - Monolight Kits.
Question and answer discussion forum concerning user instructions and resolving problems with the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2 - no comments have been made yet - be the first to add a comment
using digital optical out. "clicking sound." CD plays fine. video HDMI is fine. since there is no toslink setting, I try SPDIF/line out. What audio setting should I use? ...Vanguard ed 11 8 x 42 binos - Vanguard 10x42 Endeavor ED II Binocular ENDEAVOR ED II 1042 Posted by: gary hensman 2025-04-15 12:14:16
the distance adjusting screw is coming loose. how do i tighten it?...stand manual - On-Stage Mixer Stand MIX400 Posted by: T Douma 2025-04-14 19:22:55
Question and answer discussion forum concerning user instructions and resolving problems with the Elinchrom D-Lite RX 2 2-Light To Go Kit with Stands EL20841.2 - no comments have been made yet - be the first to add a comment