|
User manual for Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II
Overall Rating: 4.0
80% of respondents would recommend this to a friend.
- Manufacturer: Fiio
- Basic description and contents of package
- Product classification: TVs & Entertainment - Portable Audio - iPods & Media Players
- Safety instructions
- Startup and operation of the ipods & media players
- Tips for setting up your Fiio
- Settings and expert assistance
- Contact Fiio service
- Troubleshooting
- Warranty information
|
We recommend checking out our discussion threads on the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II,
which address similar problems with connecting and setting up iPods & Media Players Fiio.
|
User manual for the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II
The user manual for the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II provides
necessary instructions for the proper use of the product TVs & Entertainment - Portable Audio - iPods & Media Players.
The X3 (2nd Gen) from Fiio is a portable high resolution audio player and USB-DAC for audio enthusiasts. The unit features an audiophile grade architecture and premium components capable of playing files up to 24-bit/192 kHz in a variety of formats including native DSD, WAV, WMA, ALAC, FLAC, APE, AIFF, and more. The X3-II utilizes a Cirrus Logic CS4398 DAC coupled to a finely tuned low-pass filter offering extremely low noise and phase distortion. Additionally, the tantalum capacitors in the analog circuit provide minimal internal resistance for the best uncolored sound. Dual crystal oscillators ensure the lowest jitter and highest precision playback of music at any sample rate, eliminating conversion artifacts.
The player offers a standard 1/8" / 3.5mm headphone output and a separate line out/digital (coaxial) out via 1/8" / 3.5 mm. The X3II has no on-board memory, but uses a microSD card slot supporting up to 128 GB. The 2600 mAh Li-polymer battery provides up to 11 hours of playback under normal conditions. The user interface (UI) offers six unique themes, while the classic scroll wheel and 2.0" TFT display offer easy navigation, which supports browsing and playback via folders, songs, albums, artists, genres, favorites, and playlists. The 10-band graphic EQ and the 120-step digital volume control allow for custom tailored sound and levels.
The chassis is made of aluminum alloy and features a high reflectance fine-grain faceplate. The X3-II ships with a 3' / 1m high-current micro USB data/charging cable, an 1/8" / 3.5mm coaxial S/PDIF adapter, a black silicone case, two screen protectors (1 applied in-factory), and a set of three Bodywork stickers (USA flag, wood grain, and carbon fibre).
|
If you own a Fiio ipods & media players and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II:
| Line Out | 1/8" / 3.5 mm (Shared line out / S/PDIF coaxial out) | | Digital Output | 1/8" / 3.5 mm (Shared line out / S/PDIF coaxial out) | | DAC | USB DAC: Supports up to 24-bit / 192 kHz and DSD (driver installation required) | | Headphone | 1/8" / 3.5 mm | | THD + N | <0.001% (1 kHz) | | Frequency Response | 20 Hz to 20 kHz | | Crosstalk | >102 dB (10 kOhms / 1 kHz) | | Signal to Noise Ratio (SNR) | ≥114 dB (A-weight) | | Dynamic Range | ≥101 dB | | Line Output Level | 1.45 Vrms (10 kOhms / 1 kHz) | | Output Power | Output Power 1: >224 mW (16 ohms / THD+N <1%)
Output Power 2: >200 mW (32 ohms / THD+N <1%)
Output Power 3: >24 mW (300 ohms /THD+N <1%) | | Frequency Response | 20 Hz to 20 kHz | | Signal-to-Noise Ratio (SNR) | ≥113 dB (A-weighted) | | Output Impedance | <0.2 ohms (32 ohms) | | Crosstalk | >74 dB (1 kHz) | | THD+N | <0.001% (1 kHz) | | Maximum Output Voltage | >7.2 Vp-p | | Maximum Output Current | >75 mA (For reference) | | Power | USB Charger: 5 VDC 2A (recommended)
Computer USB Port: 450 mA | | Battery Charge Display | Red light indicates, green light turns on after fully charged | | Battery Display | Yes (accurate battery % readings)） | | Battery Capacity | 2600 mAh, 3.7 V Li-polymer | | Battery Life | >11 h (32 ohms; normal volume with display off ) | | Charging Time | Computer USB Port: Approximately 8 hours
2 A USB Charger: Approximately 3 hours | | Audio Formats | Lossless
DSD: DSD64, DSD128 (.iso, .dsf & .dff)
APE(Fast): 192 kHz/24-bit
APE(Normal): 96 kHz/24-bit
APE (High): 96 kHz/24-bit
FLAC: 192 kHz/24-bit
WAV: 192 kHz/64-bit
WMA Lossless: 96 kHz/24-bit
Apple Lossless: 192 kHz/24-bit
Lossy Compression
MP2, MP3, AAC, ALAC, WMA, OGG | | Model Name | X3 (X3 2nd gen) | | Color | Titanium | | Material of Construction | Aluminum Alloy | | Chipset | SoC: JZ4760B
DAC: CS4398
LPF: OPA1642
OP: OPA1642+LMH6643 | | Memory Capacity | 128 GB via microSD Card | | Display | 2.0" TFT screen, 320 x 240 pixels | | Drive Ability | 16 to 150 ohms | | Volume Control | 120 steps digital potentiometer | | Equalizer | 10-band equalizer (±6 dB) | | Balance Control | 5 dB | | Gain | Gain Low: 2.6 dB
Gain High: 8.6 dB | | Dimensions (L x H x D) | 3.8 x 2.3 x 0.6" / 96.7 x 57.7 x 16.1 mm | | Weight | 4.8 oz / 135.0 g | | Package Weight | 1.0 lb | | Box Dimensions (LxWxH) | 6.6 x 5.1 x 2.2" | |
The user manual for the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II can be downloaded in .pdf
format if it did not come with your new ipods & media players, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Fiio users keep a unique electronic library
for Fiio ipods & media playerss,
where you can use our link to download the user manual for the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II.
The user manual lists all of the functions of the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II,
all the basic and advanced features and tells you how to use the ipods & media players.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Fiio service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II. User manuals are also
available on the Fiio website under TVs & Entertainment - Portable Audio - iPods & Media Players.
Question and answer discussion forum concerning user instructions and resolving problems with the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II
Post new comment to Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II
| Subject: Viveri Yudi | | Date: 22.01.2021 09:35:59 | Author: Mak Kari | | I have Fiio X3 II but can't turn on after I connected to my computer (windows). would you like to give me solution for the problem? tq | | Reply |
| Subject: Fiio x3 ii | | Date: 01.04.2017 03:49:59 | Author: Thomas Michahelles | | where can i find the x3 ii manual in GERMAN? | | Reply |
Post new comment/question/response regarding the Fiio X3 (2nd Gen) Portable High Resolution Audio Player X3-II
|
|
|
|
|
