|
User manual for Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU
![Overall rating 5.0 Overall rating 5.0](./images/rating/5.0.gif) Overall Rating: 5.0
100% of respondents would recommend this to a friend.
- Manufacturer: Yamaha
- Basic description and contents of package
- Product classification: Pro Audio - Recording - Analog Recording Mixers
- Safety instructions
- Startup and operation of the analog recording mixers
- Tips for setting up your Yamaha
- Settings and expert assistance
- Contact Yamaha service
- Troubleshooting
- Warranty information
- Price: 200 USD
|
We recommend checking out our discussion threads on the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU,
which address similar problems with connecting and setting up Analog Recording Mixers Yamaha.
|
User manual for the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU
The user manual for the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU provides
necessary instructions for the proper use of the product Pro Audio - Recording - Analog Recording Mixers.
The MG10XU from Yamaha is a compact ten-input mixer with built-in effects for performances, lectures, recordings and similar applications. The mixer features four mic/line combo inputs with D-PRE mic preamps as well as six 1/4" line inputs with stereo level controls. It also features USB connectivity and is capable of providing two channels in and two channels out to your computer at up to 24-bit / 192kHz, ideal for recording live performances, demos and more.
Each of the four mic/line inputs is equipped with a 3-band EQ, pan control and a high pass filter. The four D-PRE mic preamps feature an inverted Darlington circuit and switchable 48V phantom power for use with dynamic and condenser microphones. They also each feature 26dB attenuation switches for recording loud sound sources such as guitar amplifiers.
The MG10XU mixer has stereo XLR and TRS outs for connecting to your PA system or monitor speakers. It also has a 1/4" headphone output with level control for personal monitoring, as well as additional TRS 1/4" stereo monitor outs for sending to powered speakers, amplifiers or devices such as digital recorders. Each of the MG10XU's channels feature a dedicated FX bus send level and there are 24 effects presets to choose from. The overall level of the FX bus is controlled by the dedicated FX return level control. Providing reverbs, delays, phaser, flanger, chorus, tremolo, auto-wah, distortion and more, these effects can be used to help vocals and instruments sit better in your mix.
|
If you own a Yamaha analog recording mixers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU:
Built-in Effects | SPX algorithm: 24 program | Phantom Power | +48 V switchable, channels 1 - 4 | Digital I/O | USB: USB Audio Class 2.0 compliant Sampling frequency: max 192 kHz Bit depth: 24-bit | Input Channels | 4x mono [mic/line] 3x stereo [line] | Output Channels | 2x stereo out 1x monitor out 1x headphone out 1x FX out | Bus | Stereo: 1 AUX[FX]: 1 | Pad | 26 dB (mono channels) | HPF | 80 Hz, 12 dB/oct (mono channels) | Compressor | Threshold: +22 dBu to -8 dBu Ratio: 1:1 to 4:1 Output level: 0 dB to 7 dB Attack time: approx. 25 msec Release time: approx. 300 msec | Equalizer | EQ high gain: +15 dB/-15 dB, Frequency: 10 kHz shelving EQ mid gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking EQ low gain: +15 dB/-15 dB, Frequency: 100 Hz shelving | LED | Peak LED turns on when post EQ signal reaches 3 dB below clipping | Level Metering | 2 x 7-segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] | Total Harmonic Distortion | 0.02% @ +14 dBu (20 Hz to 20 kHz), GAIN knob: Min, 0.003% @ +24 dBu (1 kHz), GAIN knob: min | Frequency Response | +0.5 dB/-1.0 dB (20 Hz to 48 kHz), refer to the nominal output level @ 1 kHz, GAIN knob: min | Equivalent Input Noise | -128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max) | Residual Output Noise | -102 dBu (STEREO OUT, STEREO LEVEL knob: min) | Crosstalk | -83 dB | Power Requirement | PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha | Power Consumption | 22.9 W | Operating temperature | 0 to +40˚C (32 to 104˚F) | Dimensions | 9.6 x 2.8 x 11.6" (244 x 71 x 294 mm) | Net Weight | 4.63 lb (2.1 kg) | Package Weight | 7.8 lb | Box Dimensions (LxWxH) | 15.7 x 14.2 x 5.3" | |
The user manual for the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU can be downloaded in .pdf
format if it did not come with your new analog recording mixers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Yamaha users keep a unique electronic library
for Yamaha analog recording mixerss,
where you can use our link to download the user manual for the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU.
The user manual lists all of the functions of the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU,
all the basic and advanced features and tells you how to use the analog recording mixers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Yamaha service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU. User manuals are also
available on the Yamaha website under Pro Audio - Recording - Analog Recording Mixers.
Question and answer discussion forum concerning user instructions and resolving problems with the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU
Post new comment to Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU
Subject: No mic | Date: 18.01.2017 01:39:01 | Author: Cliffyarosh | Set up my equiptment tonight since my last gig; no mic.
Changed cords first them mics. Still no sound.? | Reply |
Post new comment/question/response regarding the Yamaha MG10XU - 10-Input Mixer with Built-In FX and MG10XU
|
|
|
|
|