|
User manual for Yamaha P7000S - Two Channel Power Amplifier P7000S
- Manufacturer: Yamaha
- Basic description and contents of package
- Product classification: Pro Audio - Live Sound - Power Amplifiers
- Safety instructions
- Startup and operation of the power amplifiers
- Tips for setting up your Yamaha
- Settings and expert assistance
- Contact Yamaha service
- Troubleshooting
- Warranty information
- Price: 750 USD
|
We recommend checking out our discussion threads on the Yamaha P7000S - Two Channel Power Amplifier P7000S,
which address similar problems with connecting and setting up Power Amplifiers Yamaha.
|
User manual for the Yamaha P7000S - Two Channel Power Amplifier P7000S
The user manual for the Yamaha P7000S - Two Channel Power Amplifier P7000S provides
necessary instructions for the proper use of the product Pro Audio - Live Sound - Power Amplifiers.
The Yamaha P7000S is a rack-mountable stereo power amplifier for sound reinforcement applications offering 700 watts per channel at 8 ohms and a moderate weight for its size. The P7000S has been optimized for use with Yamaha's Club Series speakers and is equipped with a YS engagement switch, which activates proprietary circuitry that matches the output of the amplifier to the capability of the speakers; that being said, speakers from all other manufacturers are supported as well and the YS circuitry is defeatable.
Another exclusive feature of the P7000S is the EEEngine energy conservation design, which obtains the same full output that conventional amplifier designs offer, but with half the power consumption. This attribute, in conjunction with a full complement of thermal and limiting overload protection, allows for cooler, quieter operation and improved frequency response with minimized distortion. The P7000S has XLR and 1/4" balanced inputs and Neutrik Speakon, binding post and 1/4" speaker outputs for connection to almost any sound system.
The rear panel offers several filtering options, the YS activation switch, and a mode switch - the amplifier supports stereo, bridged, and parallel operation. There is a comprehensive group of bright, color-coded LED activity indicators, and the front panel channel attenuator knobs are thoughtfully recessed and protectively covered. Yamaha has built a lot of value into the P7000S and made it available to budget-conscious schools, club date musicians, and event facilities at a very reasonable price.
|
If you own a Yamaha power amplifiers and have a user manual in electronic form,
you can upload it to this website using the link on the right side of the screen.
You can upload and download the manual for the Yamaha P7000S - Two Channel Power Amplifier P7000S in the following formats:
- *.pdf, *.doc, *.txt, *.jpg - Other formats are unfortunately not supported.
|
Additional parameters of the Yamaha P7000S - Two Channel Power Amplifier P7000S:
| Output Power | Rating @ 1kHz, THD=1%
750W @ 8Ω Stereo (per channel)
1100W @ 4Ω Stereo (per channel)
2000W @ 8Ω Bridged-Mono
Rating @ 20Hz - 20kHz, THD=0.1%
700W @ 8Ω Stereo (per channel)
950W @ 4Ω Stereo (per channel)
1900W @ 8Ω Bridged-Mono
Rating @ 1kHz, 20ms Nonclip
1600W @ 2Ω Stereo (per channel)
3200W @ 4Ω Bridged-Mono | | Damping Factor | Greater than 350 (8 ohms, 1kHz) | | Input Sensitivity | +8dB (8 ohms, Max Attenuation) | | Input Impedance | 30 k ohms (Balanced)
15 k ohms (Unbalanced) | | Gain | 32.1dB | | Frequency Response | 20Hz - 50kHz (0dB, +0.5dB, -1dB @ 1 Watt, 8 ohms) | | Signal-to-Noise Ratio | 104dB | | Total Harmonic Distortion (THD) | Less than 0.1%, 20Hz - 20kHz, Half Power | | Input Connections | 2 x 3-pin XLR Female (Balanced)
2 x 1/4" (6.3mm) TRS Phone (Balanced) | | Output Connectors | 2 x Speakon
2 x 5-way Binding Post
2 x 1/4" (6.3mm) Phone | | Controls Front Panel | 1 x Push On/Off Power Switch
2 x 31-Position Attenuator Knobs | | Controls (Rear) | 1 x Stereo/Bridge/Parallel Mode Switch
2 x Subwoofer/Low Cut/Off Filter Switches
2 x 25Hz - 150Hz Frequency Control Switches
1 x Yamaha Speaker Processing On/Off Switch | | Indicators | 1 x Green Power On LED
1 x Red Protection LED
1 x Red Heatsink Temp Overheat LED
1 x Yellow YS Processor LED
2 x Green Signal LEDs
2 x Red Clip LEDs | | Cooling | Dual Variable-Speed Fans | | Power Consumption | Idle: 35W
1/8 (4 ohms): 700W
Maximum (4 ohms): 4000W | | Power Requirements | 120V 60Hz | | Dimensions | 19 x 3.5 x 18" (483 x 89 x 457 mm) | | Weight | 26.5 lbs (12 kg) | | Specialties | Proprietary EEEngine Operating Efficiency Design
Limiter Amp Protection Circuitry
YS Processing | | Package Weight | 29.0 lb | | Box Dimensions (LxWxH) | 22.4 x 22.2 x 7.7" | |
The user manual for the Yamaha P7000S - Two Channel Power Amplifier P7000S can be downloaded in .pdf
format if it did not come with your new power amplifiers, although the seller is
required to supply one. It is also quite common that customers throw out
the user manual with the box, or put the CD away somewhere and then can’t find it.
That’s why we and other Yamaha users keep a unique electronic library
for Yamaha power amplifierss,
where you can use our link to download the user manual for the Yamaha P7000S - Two Channel Power Amplifier P7000S.
The user manual lists all of the functions of the Yamaha P7000S - Two Channel Power Amplifier P7000S,
all the basic and advanced features and tells you how to use the power amplifiers.
The manual also provides troubleshooting for common problems. Even greater
detail is provided by the service manual, which is not typically shipped with the product,
but which can often be downloaded from Yamaha service.
If you want to help expand our database, you can upload a link to this website
to download a user manual or service manual, ideally in .pdf format. These pages
are created by you – users of the Yamaha P7000S - Two Channel Power Amplifier P7000S. User manuals are also
available on the Yamaha website under Pro Audio - Live Sound - Power Amplifiers.
Question and answer discussion forum concerning user instructions and resolving problems with the Yamaha P7000S - Two Channel Power Amplifier P7000S
Post new comment to Yamaha P7000S - Two Channel Power Amplifier P7000S
| Subject: home use | | Date: 18.02.2023 21:41:06 | Author: Jeffrey Eggleston | Magnepan speakers need a lot of power to get the most detailed sound out of them. Would this amp work well magnepans in a home system? Or be too much of wattage?
thanks | | Reply |
| Subject: Manual download | | Date: 03.09.2020 16:11:27 | Author: Mambwe Daniel | | Want to download manual | | Reply |
Post new comment/question/response regarding the Yamaha P7000S - Two Channel Power Amplifier P7000S
|
|
|
|
|
